Factory Foote T6.4 Rear Tower for Buggy Shocks with Link Mount

Factory Foote T6.4 Rear Tower for Buggy Shocks. This tower has similar geometry to buggy tower, with an extra outer hole.

Rear Shock Setup with ASC71140/ASC71141 Rear Arms:

Truck Body with Buggy Shaft. Stroke 28.5mm, +4 Shock End (With the smaller diameter Smoothie 2, I would use this)

Buggy Body with Truck Shaft. Stroke 37mm, +4 Shock End, 6mm External Limiters (Same droop as Truck body/Buggy shaft with approx. 2mm more Up-travel.

Both of these will work. Up-travel helps me suck the car down on throttle, on landing. Less up-travel is better in the corner. Everything is a give and take.