Factory Foote T6.4 Rear Tower for Buggy Shocks No Link Mount

Factory Foote T6.2 Rear Tower for Buggy Shocks. This tower has similar geometry to a buggy tower, with an extra outer hole. The Body mount is 1mm lower than factory. This tower retains factory ball stud mount.

Rear Shock Setup with ASC71140/ASC71141 Rear Arms:

Truck Body with Buggy Shaft. Stroke 28.5mm, +4 Shock End (With the smaller diameter Smoothie 2, I would use this)

Buggy Body with Truck Shaft. Stroke 37mm, +4 Shock End, 6mm External Limiters (Same droop as Truck body/Buggy shaft with approx. 2mm more Up-travel.

Both of these will work. Up-travel helps me suck the car down on throttle, on landing. Less up-travel is better in the corner. Everything is a give and take.