Factory Foote B7 -2mm Front Tower V2

Factory Foote B7 -2mm Front Tower, Version 2. As we test, we develop updated products. I thought there was too much flex where shocks mount. We changed the profile to add material, and brace where the shocks mount. By doing this, we had to mill the back side for clearance for the shock cap. I think this tower flexes much less.

This tower is 2mm shorter than factory tower. Being 2mm shorter, this tower leans shock in very slightly from factory geometry. The stock  tower guard will fit.

Buggies with carpet tires, usually need up-travel limiting. A 2mm shorter tower adds droop and takes away up-travel. Take 2mm out of shock stroke or go to 2mm shorter shock end.