Factory Foote B6.4 -2mm Rear Tower with Link Mount & Lower Wing Mount

Factory Foote B6.4 -2mm  Rear Tower with Link Mount and Lower Wing Mount.

This tower accepts the rear camber link. The link is parallel to the dog bone. This should reduce bind, and let the rear roll more freely. The tower as 2 lower mounting option. The upper is -1.75mm, and the lower is -4. The wing mounting holes are now wider. Included are: Tower, Wider wing mount angled spacer, and transmission spacer to replace ball stud mount. This tower lowers shock holes by 2mm, while keeping the same shock angle.

This is a 4mm carbon fiber tower, machined out of glossy carbon fiber. This tower keeps factory shock geometry. The inner/upper hole, is the same as factory mount with 4mm of ball stud washers. Holes are separated by 2.25mm in height, and 4mm across.

Jconcepts 6.5″ Carpet/Astro Wing was used for mock up. Wing Mount will fit in recess of Jconcepts 6.5″ wing.